An antique office chair can be a one-of-a-kind treasure, and if the upholstery is still in good shape it makes no sense to get rid of it. Often the antique office chair mechanism isn’t the best quality, allowing the chair to tilt back further than desired.
Does your antique office chair lean back too far?
You may need to examine the antique office chair mechanism to fix this. The easiest way to fix the tilting is by turning the adjustment knob. If this doesn’t work, you may need to replace the springs in the mechanism.
That antique office chair adds a certain touch of class to your office, but it’s difficult to work when it feels like you could tumble backward at any point. Today, we’re going to discuss how you can repair an antique office chair tilt mechanism so you can always work comfortably. Keep reading to learn more.
Repairing the antique office chair tilt mechanism
One of the biggest issues people face with their antique office chairs is that they lean back way too far. Everyone needs an office chair that is able to tilt for the best ergonomics. When the chair goes back too far, it creates a lot of problems for the person who is trying to work in it.
When this happens, it’s usually a sign that the adjustment knob is out of place or the springs in the antique office chair tilt mechanism need to be replaced. In order to get a better look at what we mean, you should flip your antique office chair upside down. Take a look at the mechanism, and you’ll likely notice an adjustment knob.
This adjustment knob is responsible for compressing the springs. So as long as you look in this area, you should find a solution.
Turn the adjustment knob
Let’s start with the easiest and most common fix first. An antique office chair is likely older than the company you are working for. There is a good chance that over the years, the adjustment knob isn’t in the exact same place as it started out. You may need to tighten the adjustment knob to fix the over-tilt.
The easiest way to test the adjustment chair is to do it while you’re sitting down. You may notice that the knob is loose, so turn it clockwise to tighten it up. When you do this in the chair, you can test the tilting as you adjust the knob.
If tightening the adjustment knobs didn’t work out in your favor, you may need to look at the springs in the antique office chair mechanism to find your solution. You may not feel comfortable replacing the springs, so this is a less invasive option that you could try.
- To do this, you will need to have help measuring.
- Get them to take a measurement of the springs when the chair is upright and then another measurement when you lean back to your ideal range to get the compressed length.
- Find dowels that are the same size as the compressed length.
- Insert these dowels in the springs to restrict the compression.
Replace the springs
It’s very likely that the springs in the antique office chair mechanism are worn out and need to be replaced. Getting the old springs out is easy. First, you will need to remove the adjustment knob, and then push the bolt back. Doing this will allow the springs to come out easily so you can put new ones back in.
Do you have an antique office chair at home or work?
While this chair may have all the right aesthetics, it’s not very comfortable when the antique chair tilts back too far. If you feel like you’re about to fall out of your seat, you need to take a look at the antique office chair mechanism.
The easiest way to resolve this issue is by tightening the adjustment knob. When you do this, no further action is required. However, if the antique office chair mechanism’s springs are worn out, you should replace them to fix the problem. This will make it easier to get the right ergonomics in your office.