Is your office chair outrageously outdated?
Not everyone has a modern office chair that can adjust your height automatically. But, you can learn how to adjust old office chairs easily in just a few simple steps.
Older office chairs can be inconvenient to adjust because they do not have modern levers on the side. These levers let you push or pull to raise and lower the height of your chair. Older chairs, called executive chairs, were not equipped with this technology.
Executive chairs used several other features to adjust the height of their chair. Bolts, knobs, and general assembly were the most common tactics for adjusting the height of older office chairs.
In general, older office chairs required physical alterations from the users. People must adjust the chair themselves by flipping them over and performing a few simple steps.
Knowing how to do so is important for anyone who works in the office environment. A comfortable sitting position helps avoid negative body side effects, including neck strain, wrist pain, and knee problems.
The easiest way to adjust office chairs is by twisting them counterclockwise or clockwise to adjust the height. Most older office chairs used this method as a part of their design. There are several other ways to adjust the height of office chairs, like releasing bolts, physically disassembling, and much more.
Follow these steps to adjust an old office chair:
- Find the ideal height
- Flip your chair over
- Release locks
- Adjust the height
- Flip the chair and check
Most modern business chairs have pneumatic lifts, which make adjusting the height of your chair easy. Older executive office chairs can be slightly more difficult to adjust. In some cases, these chairs require physical adjustments to raise and lower the chair’s height.
Adjusting the height of older office chairs can be frustrating if you do not know how to adjust old office chairs. There is no lever underneath the chair, making people think it is extremely difficult to adjust the height. Luckily, it is easy!
Read this guide to learn how to adjust old office chairs just as easily as modern office chairs.
How to Adjust
Adjusting an old office chair is easy if you know how they work. There are plenty of outdated executive chairs still in use. If you have headed back to the office after a hiatus, you might be sitting in one while reading this.
Uncomfortable chairs can make daily life unpleasant. An office chair that sits at the wrong height can be bad for your posture, cause neck strain, back pain, and more.
Find the Ideal Height
The first thing to do is measure the ideal height of your chair. There are a few important things to take into consideration when measuring your chair’s height.
Chair height considerations include:
- Your comfort level
- The distance from your desk, monitor, etc.
- The impact on your posture
To get the most accurate results, use a tape measurer. You must measure the distance between the floor and your knee accurately. Your feet should be flat on the ground, positioning your knees at a ninety-degree angle.
Flip the Chair Over
Flipping a chair over is critical for making adjustments because most adjustments are made underneath the chair’s seat. The wheels of the chair should be in the air. Be careful when flipping your chair, or you may accidentally knock something off your desk.
Release any locks holding your chair in place. These will make it possible to move your chair and adjust its height. Locks are under your seat, displayed in red, or have a lock symbol next to them.
Adjust the Height
Older office chairs adjust their height in several ways. You will need the measurement you took before and maybe an offset screwdriver to adjust the height of your chair.
Executive office chairs typically twist to lower in height. Spinning the seat a full 360 degrees clockwise will lower the seat by ¼ to ½ inches. Similarly, twisting the seat counterclockwise will raise the seat.
If twisting the set of your office chair does not adjust the height, it may require disassembly. Disassembly and reassembly is a less common method. However, it is still required to adjust the height of some older chairs.
Older chair models without auto-lock features will require manual re-locking before flipping your chair back over. Locking your chair in place is an important part of the adjustment process because it assures stability.
Without locking, older office chairs can automatically lower. In the worst-case scenario, office chairs even fall apart when you take a seat.
Flip the Chair and Check
After you finish adjusting your chair and locking everything in place, flip your chair. Be careful as you take a seat and check the height. The new height may feel strange at first. Measure it compared to the height you measured with your tape measurer.
If it is not proper height, you can measure the height again and repeat the process.
Adjusting the height of your chair on executive chairs is easy. In five steps, you can have your executive chair adjusted to the height of your desire. Learning how to adjust old office chairs is helpful when working in an office environment because you ensure comfortability.
Before adjusting your executive office chair, find the ideal height by measuring your chair. The ideal height of your office chair should measure from the floor to the middle of your knees. Make sure your feet are flat on the ground, with your knees are at a ninety-degree angle.
This measurement is important because:
- It eliminates the need for trial and error
- It makes the adjustments more concise
- Creates better posture
In only six steps, you can have older office chairs adjusted. It can take longer to adjust the height of your chair manually compared to modern office chairs.
But it is worth it for comfort and better posture. The most popular way to lower or raise the height of your old office chair is by rotating the seat. You can also make manual adjustments by disassembling the chair and putting it together again at your ideal height.