A wobbly office chair can have a negative effect on your workday. When you’re not comfortable in your seat, you won’t be as productive as you normally are. Luckily, you don’t have to replace a wobbly office chair.
You can easily fix a wobbly office chair once you determine which part of the chair is causing the wobble. To do this, start by inspecting your chair in the 3 main spots the wobble could be coming from:
- Check for damage on the wheels
- Make sure there aren’t any screws missing in the legs
- Make sure the seat plate is tight
Fixing a wobbly office chair is easy to do on your own. If you need to fix your wobbly chair, keep reading to find out how. We will cover all of the steps on this page so you can work comfortably again.
How to fix
Is your office chair wobbly?
It won’t be for long after you read this guide. In order to fix your wobbly chair, you need to get down to the root of the cause. One of the chair’s parts is either damaged or loose. This fix is as simple as replacing the damaged part or tightening the loose part.
The tricky part is pinpointing where the wobbly is coming from. In most cases, it will either be the wheel, a loose/ missing screw, or a loose chair plate. However, in some situations, you may need to take your chair apart to replace an internal part, such as a broken dowel pin.
You don’t need to be an expert to fix your wobbly office chair, you just need to be patient as you look for the part that is causing it.
Check for damage on the wheels
When your office chair is wobbly, the first thing you should do is flip it over so you can get a better look it is. This can be either on its side or upside down. Most wobbly office chairs are caused by a damaged wheel. Thoroughly examine each wheel to make sure they aren’t damaged or loose.
If you sport a damaged wheel, it will need to be replaced. You should be able to unscrew the wheel or pop it out using your hands. In order to get a replacement wheel, you will need to contact the manufacturer. Depending on where you purchased the office chair from, you may be able to get a replacement wheel from three as well.
Make sure there aren’t any screws missing in the legs
If the wobble to your office chair is recent, it’s likely caused by a loose screw. Office chairs are susceptible to wear and tear over the years. If you use that chair often throughout the workday, it likely sees its fair share of twisting, turning, and tilting. After a lot of use, a screw could start to come out.
Examine the legs of your office chair to make sure all the screws are still in place. If you see one that is loose, simply tighten it to get your chair back in place. However, if one is missing, check the ground where you were sitting. There is a good chance that it could be nearby.
If this happened a while ago and you can’t find the missing screw, you’re not out of luck. All you need to do is unscrew one of the other leg’s screws and bring it to a local hardware store to find a replacement screw.
Make sure the seat plate is tight
The seat plate is another culprit for causing a wobbly chair. This is the metal plate that is attached to the bottom of your seat and connects it to the lift. A seat plate is necessary for keeping your office chair balanced and sturdy while you work. If it’s damaged or loose, it will not be effective. This is what causes the wobble.
Flip the chair over and examine the seat plate. Wear and tear can cause the screws to become loose. Tighten or replace the screws to stop the chair from wobbling. If the seat plate looks dented or damaged, you may have to contact the manufacturer for a replacement.
Check internal parts
If the solution to your wobbly chair isn’t one of the methods we discussed above, you may have to take your chair apart to find the internal part causing the wobble. This is what you need to do to fix the problem:
- Using a pencil or chalk to label all of your chair’s parts. Make sure to use a system you are familiar with because this will come in handy when you put the parts back together.
- Carefully disassemble the office chair so you can locate which part is damaged.
- While the chair is disassembled, take a moment to clean all of the parts. This can be done with a dampened rag.
- Once you have located the damaged part, contact the manufacturer to get a replacement.
- Use adhesive glue on the joints when putting the parts of the chair back together. This will help strengthen the joints so the chair won’t wobble again anytime soon.
- Find a way to bind freshly glued pieces together. We recommend using a strap clamp, but if you don’t have one, an old belt or rope will also work.
- Wipe away any excess glue.
Wear and tear could cause parts of your chair to become weak over time. This can lead to parts loosening or becoming damaged. When your office chair begins to wobble, we recommend giving the chair a full examination to see what could be causing the unwanted movement before taking the chair apart.
Always make sure all screws are tightly fastened after putting an office chair back together. If any screws are not able to tighten all the way, they should be replaced. This will ensure your office chair stays in place as you work.