How to Raise Your Office Chair without a Lever

To Summarize:

If the lever is missing in action, fix this with wooden dowels by unscrewing the seat.

It’s a real bummer when you go to adjust the height of your office chair and the lever is missing in action.

Is there a way to raise an office chair sans a lever?

Yes, it is possible. You can do this with wooden dowels and pieces or by unscrewing the seat. However, it will depend on your chair’s age and design style.

Having an operational office chair is crucial. It provides support, comfort, and ergonomics. Since not having a lever puts a damper on your workflow, you’ll have to get resourceful about fixing it.

Should you bother attempting to raise the chair without a lever?

When your chair isn’t at the perfect height, it can create issues with the potential to hurt your back, neck, hips, arms, wrists, and fingers. This will be especially true if you type a lot.

If there’s a vast difference between the height of the desk and the chair, you are certain to be uncomfortable. Such a distance gap can adversely affect your posture. So, it’s better to take the time to adjust it than live with what is.

What is the Best Way to Raise an Office Chair If the lever is missing in action

Are you struggling to get that chair to go back up? You can easily fix a chair that won’t go Up on your own just Follow the simple hacks from this article – Click here:

Giving yourself the appropriate seated height is the only way to ensure comfort. Peruse the tips below to see if they work for your situation. If not, perhaps they will inspire you to figure it out on your own.

But, before attempting anything, turn the chair over and inspect where the lever should be. Make sure there isn’t any damage like bends, dents, or cracks. Also, check to see if the original lever broke off inside.

When damage is present, particularly breaks and cracks, it might be better to take the chair to a repair specialist or buy a new chair altogether. Don’t take chances incurring injury just because you sat down in a faulty chair; so avoid sitting in it.

1. Measuring

While you have your chair turned upside down, measure the diameter of the hole where there ought to be a lever. Take note of this measurement and put the chair in a normal position.

Sit on it and determine the distance that will be most comfortable. Check that your feet are flat on the floor and at what position your knees touch (or don’t touch) the desk. If the distance is above your waist, the posture isn’t correct and you will have to adjust it. Write this distance on the paper.

Then you want to measure the height of the chair in relation to the desk as it is at the moment. Measure the distance between your knees and the floor in the proper comfortable position. Write down this number as well. Finally, calculate the difference between the two numbers. This will be the height your chair should be at to ensure your comfort.

2. Detach the Seat

Turn the chair upside down again and detach the seat. Grab an Allen wrench or a screwdriver to loosen the screws on the chair. Use a towel or cloth to protect your seat if need be. The placement of these and what kind of screws are there will vary depending on the brand and model.

Most use run-of-the-mill mounting screws. But specialty chairs or custom-made ones may use other types.

3. Wooden Dowels ; Pieces

Depending on how the lever mechanism isn’t operating properly, you can use wooden dowels or pieces of wood to create a makeshift lever. If you simply need a stick to put into the hole, take the diameter measurement from earlier and go to a home repair or hardware store. If they’re very small and tiny, you may want to go to a hobby or craft store instead.

Here, you’ll be able to locate an appropriately sized dowel you can use for your chair. However, if you find the wooden material to be flimsy, see if there isn’t a metal one or some other thing you can use as a lever. Also, if you need to make a makeshift mechanism for the lever, get some different-sized wooden pieces for your purposes.

Configure Logistics

When you return to the lever-less chair, begin tinkering with the wooden pieces and/or the dowel and start configuring the logistics of it. You might even be able to place the wooden pieces between the seat and the bottom to give you a little height and keep it there.

You could also drill some holes into a wooden piece to make a hole for the dowel. You might need additional screws to make it work, but it might be worth it to try. Although this may require more energy and effort on your part, it’s better than paying for repairs or buying a new one; especially if you don’t have time or money for that.

4. Spinning the Seat

If you have an older chair, it may be possible to unscrew the seat to raise or lower its position. For this, your chair should have a threaded post and you may have to lubricate it with some WD-40. With the chair upside down, brace the seat while you grip and turn the bottom.

Remember, righty tighty and lefty loosey. In other words, if you want to give yourself height, you have to turn it counterclockwise. For lowering, you will have to turn it clockwise.

Use lubricant if it’s stuck or stubborn. If you think this is going to be a doozy, make sure you wear scrubby clothes to protect yourself from oil stains. You’ll also have to periodically return the chair to a normal position so you can check the height until it’s to your satisfaction.

Conclusion

Although these tips and tricks may seem time-consuming, it’s worth putting in the time to temporarily fix your chair. But, if you believe it’s beyond your capabilities, then it will be better to take it to a repair specialist or begin hunting around for a new one.